Microsoft Corporation HS-36W Benutzerhandbuch
G e t s t a r t e d
6
When you disconnect the power cord of the charger, grasp and pull
the plug, not the cord.
the plug, not the cord.
The fully charged battery has power for up to 6 hours of talk-time or up
to 110 hours of standby time. (In the standby mode, the headset is
switched on but no call is in progress.)
to 110 hours of standby time. (In the standby mode, the headset is
switched on but no call is in progress.)
When the battery is running out of power, the red indicator light lights
up. Charge the battery.
up. Charge the battery.
■ Switch the headset on or off
To switch on, press the answer/end key for about 1 second. To switch off,
press and hold the answer/end key for about 5 seconds.
press and hold the answer/end key for about 5 seconds.
■ Pair the headset with a compatible phone
Make sure that the headset is on, and put it in pairing mode by pressing
the answer/end key and the volume up (+) key at the same time over 5
seconds until the blue indicator light lights up. The indicator light
remains on for 5 minutes, during which you can pair the headset with a
compatible mobile phone.
the answer/end key and the volume up (+) key at the same time over 5
seconds until the blue indicator light lights up. The indicator light
remains on for 5 minutes, during which you can pair the headset with a
compatible mobile phone.
1. Set the phone to search for Bluetooth devices. See the user guide of
your phone for instructions.
2. When your phone finds the HS-36W headset, confirm the pairing
from your phone.
3. When prompted for the Bluetooth passcode of the headset, enter
0000.
If the pairing was unsuccessful, try to pair the devices again.
You only need to pair the headset with your phone once.
If the pairing was successful, the blue indicator light starts to flash. The
headset is now in the standby mode and ready for use.
headset is now in the standby mode and ready for use.
HS-36W_en1.fm Page 6 Thursday, March 10, 2005 4:26 PM