Microsoft Corporation RM-2 Benutzerhandbuch

•  

 to view all the persons you have blocked from 

viewing your presence information.

•

 and select

•

 to show the current status indicator 

in standby mode.

•

 to select whether you want to link 

 and 

 manually or automatically 

to the currently active profile. Note that you cannot link a 
personalised status logo to a Profile. See also Profiles on page 80.

•

 to set the phone to automatically connect to the 

service when the phone is switched on.

•

 see Chat and my presence settings on page 81. 

You can create a list for contacts whose presence status you wish to be 
aware of (network service). You can view the information if allowed by 
the contacts and if it is not prevented by the network. You can view the 
subscribed contacts either by scrolling through the contacts or via the 

 menu.

Make sure that the memory in use is either 

 or 

. See 

Selecting settings for contacts on page 70.

To connect to the Presence service, press 

 and select 

, 

 and 

. You can also view the 

subscribed contacts when you are not connected to the presence 
service, but you cannot see the presence status of the contact.

1. Press 

 and select 

 and 

. If you have 

not connected to the Presence service, the phone asks if you want to 
connect now.

2. If you have no contacts on your list, press 

. Otherwise, press 

 and select 

. The list of contacts is shown.

3. Select a contact from the list and if the contact has an ID saved, the 

contact is added to the subscribed contacts list. If there is more than 

rm-2_en1_FCC.fm  Page 75  Monday, February 16, 2004  8:14 AM