Hanbit Electronics Co. LTD. HANBIT-CFC Benutzerhandbuch

Version 1.0

HANBit CFC-xxxSx Series

HANBit Electronics Co., Ltd.

1. PRODUCT OVERVIEW

GENERAL DESCRIPTION

The CFCxxxSx series CompactFlash



card is a flash technology based with ATA interface flash

memory card. It is constructed with flash disk controller chip and NAND-type (Samsung) flash memory
device. The CompactFlash



card operates in both 3.3-Volt and 5.0-Volt power supplies. It comes in

capacity of 16, 32, 64, 96, 128, 192, 256, 384 MB and up to 512 MB formatted for type-I card.

By optimizing flash memory management, the life of this card can be extended to its maximum level.

Because the ECC function is included, the correctness of data transfer between the card and the mobile
device can be guaranteed. The power down and sleep modes of the card can ensure longer life of the
batteries in the mobile devices. It is a perfect choice of solid-state mass-storage cards for battery backup
handheld devices such as Digital Camera, Audio Player, PDA, GPS, or the applications which require high
environment tolerance with high performance sustained write speed.

FEATURES

ATA / True IDE compatible host interface

ATA command set compatible

Very high performance, very low power consumption

Automatic error correction

Support 3 power save mode : stop/idle/active

Support for CIS implemented with 256 bytes of attribute memory

Support for 8 or 16 bit host transfers

3.3V/5.0V operation voltage

Host data transfer rate : 20MB/s

Flash data transfer rate : 10MB/s

Host Interface bus width : 8/16 bit Access

Flash Interface bus width : 8 bit Access

Capacity : Min. 16MB ~ Max. 512MB

MTBF : 1,000,000 hours, minimum 30,000 insertions

Operating vibration : 15G peak to peak maximum

Operating shock : 1,000G maximum

PRODUCT SPECIFICATIONS

Capacities :

Compact Flash Card

Min.16MB ~ Max.512MB, ATA/IDE Interface Mode,

Support 3 power save mode, 3.3V/5.0V Operating Part No.

CFCxxxSx