Primex Wireless Inc. SNSP Benutzerhandbuch
Page 8
SNS™ Personal Series Clocks User Guide
SNS Personal Series Clocks
Install batteries in an SNS Personal Series Clock
Note
The battery life of SNS Personal Series Clocks is up to18 months with four high-quality alkaline
C-cell batteries. Therefore, it is important that fresh, superior-quality batteries, with an expiration date
that exceeds five years past the installation date, be used for the clock.
that exceeds five years past the installation date, be used for the clock.
The SNS Personal Series Clock notifies the user when the batteries need to be changed by showing
the “Low Battery” symbol on the clock display. Battery condition is also reported via AMP. The clock will
retain its configuration after the batteries are replaced.
the “Low Battery” symbol on the clock display. Battery condition is also reported via AMP. The clock will
retain its configuration after the batteries are replaced.
The following are recommendations for clock batteries:
•
Use only new high-quality name brand alkaline batteries
•
Batteries should be the same type and date code
•
The use of heavy duty and zinc carbon batteries is not recommended, as they will not last as long
as high-quality name brand alkaline batteries
as high-quality name brand alkaline batteries
•
Do not use rechargeable NiCad batteries, as their output voltage is too low to assure proper
operation
operation
•
Do not use standard lithium batteries
Factors affecting battery life:
• Low ambient light and frequent use of the backlight will adversely affect battery life.
• Use of the Low/High setting
• High will drain batteries, Low will preserve battery life.
• Use of the Low/High setting
• High will drain batteries, Low will preserve battery life.
Follow these steps to replace the batteries in an SNS Personal Series Clock:
1.
Dismount the clock from the wall so that you
can access the back of the clock.
can access the back of the clock.
2.
Remove the battery cover.
3.
Remove the old batteries, wait 10 seconds.
4.
Insert four Alkaline “C-cell” batteries.
5.
Replace the battery cover.
6.
When the batteries are in place, the SNS
Personal Series Clock will set to the correct
time once it is received.
Personal Series Clock will set to the correct
time once it is received.