Opticon Sensors Europe BV PHL7200-BW Benutzerhandbuch
OPTICON
User's manual
PHL-7000 series
3-50
3.2.20 System
ICON
ITEM & FUNCTION
•
“General” Tab : (Figure 3-90)
ü
To show:
Ø
Firmware information
Ø
Information about Processor type, Memory size,
Expansion card
•
“
Memory”: (Figure 3-91)
ü
Move the slider to adjust memory allocation. Default
storage memory is normally set to about 8MB with the
reminder assigned to Program memory.
ü
Press the “OK” key on the Keypad.
Note: the difference is occupied by OS between the RAM
size in Information properties and total memory size of
storage memory and program memory
•
“Device Name” Tab : (Figure 3-92)
ü
Your device uses this information to identify itself to other
computers.
ü
The input panel will open to facilitate data entry.
ü
To close the Device Name, press the “OK” button, or press
the <Enter> key on keypad.
•
“
Copyrights” Tab: (Figure3-93)
ü
Refer to this tab for specific copyright data. As a user, you
are responsible to read this statement.
Table 3-40 System