Opticon Sensors Europe BV H-27 Benutzerhandbuch

52

This device is equipped with a barcode scanner module which supports many of the 

popular barcode formats currently used worldwide.

 During the system initialization (after powering on the device for the first time 

or resetting the device to factory default), the scanner will take approximately 
30 seconds to be activated. It is highly recommended not to press the barcode 
scan trigger key within 30 seconds.

Before scanning a barcode, configure the scanner settings.

1. On the Home screen, touch 

 > Settings > 

Barcode Reader.

2. Touch one of the following options:

•

Barcode reader: Check the box to enable 

barcode module function.

•

Prefix Suffix settings: Configure the prefix and 

suffix characters.

•

Code readable settings: Configure the code 

readable settings.

•

Code options: Configure the code options.

•

Read options: Configure the read options 

including read mode, read time, margin, 

redundancy, positive and negative, and scan angle settings.

•

Output mode: Select the output mode.

•

Intent mode settings: Set the intent action and 

category. 

•

Trigger button: Specify which button(s) to be 

used as trigger key(s).

•

Handle barcodes with URI content: Enable 

URI content support.

•

Restore factory default settings: Return all 

barcode reader settings to the factory default 

settings.

•

Backup current settings: Back up the current 

barcode reader settings.

•

Restore settings: Restore the current barcode reader settings.