GeoTrax Protection LLC GT33000A Benutzerhandbuch

Seite von 3
 
 
Global Pursuit Systems is one of the USCPC Group of Companies 
 
USING THE DEVICE 
 
The 
ESP
 looks and feels like a stack of 100 bank notes.  It is designed to be placed in a 
cash drawer and remain in the drawer until needed and used in a robbery situation. 
 
One of the most critical components to the device functionality is the battery -- as it is 
needed to power the device.  The device incorporates a magnetic reed switch to keep the 
device in an off/dormant position as long as the device remains on the provided 
magnetic base.  Therefore, the device should always remain on the magnetic base 
unless being used in a robbery
. 
 
Using the device when needed in a robbery is very simple.  If you experience a robbery 
situation and you are going to give the criminal the money in your cash drawer then 
please remember the following: 
 
1.  Follow your normal robbery procedures! 
2.  To minimize the likelihood of the bank robber detecting the ESP the device 
should be, if possible, surrounded with the other bills from the drawer  
3.  Hand the entire stack of money and the 
ESP
 to the perpetrator or place it in a bag 
if provided.  Avoid trying to pass the 
ESP
 to the perpetrator as a stand-alone item 
as the detection of the device is probably likely in this scenario. 
 
4.  The 
ESP
 requires no special intervention by the user!  There are no special 
buttons to push, as the device will activate once it is removed from the magnetic 
plate. 
 
 
 
CAUTIONS & REMINDERS 
 
The success of the device is determined by the condition of the device when it is used.  In 
particular, the battery must have sufficient power to run the device.  Please handle the 
device with care and keep it in the cash drawer and on the magnetic plate at all 
times.
  There are no user serviceable components and no need for anyone other than a 
qualified technician to service the device. 
 
The 
ESP
 does not know if the person carrying it is a bank employee or a bank 
robber.  If the device needs to be removed from the teller drawer for any reason 
other than during a robbery, such as changing the band around the bills, then it is 
crucial that it only be removed for a few seconds at a time.  If the device is off of the 
magnetic plate for more than 10 seconds, it will notify law enforcement personnel 
that a bank robbery is in process.  
To minimize the incidence of false alarms, an 
additional magnetic plate will be supplied to the bank branches.  If you need to remove 
the device from the drawer, immediately place it on the additional magnetic plate.  When 
you are ready to place the device back into the drawer, be sure to place it back on the 
magnetic plate in the drawer within a few seconds.