ViVOtech Inc. VP4800M Benutzerhandbuch
ViVOpay 4800 User Guide
5
Installing the ViVOpay 4800
3.
Slide the bottom of the ViVOpay 4800 down into the saddle. Press the sides firmly until the
tabs snap into place.
tabs snap into place.
4.
The preferred cable routing of the cable is through the hole at the back of the base and in
the strain relief channel in the underside of the base.
the strain relief channel in the underside of the base.
Note: The cable should always be positioned to the back of the ViVOpay 4800 - do not
route the cable towards the front of the ViVOpay 4800.
route the cable towards the front of the ViVOpay 4800.
5.
Attach the ViVOpay 4800 serial cable to the serial port of the POS (consult your POS
manual for additional information).
manual for additional information).
6.
Connect the ViVOpay power cable to the power module. The reader will beep twice and be
ready for operation after approximately 35 seconds.
ready for operation after approximately 35 seconds.