WELINK RCL-T800N Benutzerhandbuch
Press “1” key to select “512bps” or “2” key to select “1200bps” and press “ENTER” key.
* Please remember that Frequency, Base ID, Group ID, and Baud Rate for the transmitter should be
same with pager’s to work with together.
12) Field Test
With this feature, you can test the range coverage of transmitter with the pager.
On the “Field Test” menu, press “ENTER” key.
On the display of “Field Test?” menu appears, press “#1” key to select “Yes”, “#2” key is to
select “NOT”, then press “ENTER” key.
If you select “1)Yes”, the transmitter will start field test.
The transmitter will sends signal to the pager at every seconds.
When the pager receives the signal from transmitter, the pager will light up.
You move to another place with the pager and check how far the transmitter can cover.
To stop the field test, press “CANCEL” key.
13) Transmission
With this feature, you can select how many times the transmitter send signal to the pager.
On the “Transmission” menu, press the “Enter” key.
On the display of “1)One 2)Two”, press one and “ENTER” key.
“1)One” means that if you page the pager, the transmitter will send the calling signal just one
time.
And “2)Two” means that if you page the pager, the transmitter will send the calling signal
two times automatically.
14) Set Power Off
With this feature, you can power off the transmitter.
On the “Set Power Off” menu, press the “Enter” key.
On the display of “Power Off?”, press “#1” key to select “Yes”, “#2” key is to select “NOT”,
then press “ENTER” key.
If you select “1)Yes”, the transmitter will be off automatically.
4. OPERATION
When you need to alert the pagers, just press “Pager Number” + “SEND” key.
The corresponding pager will be alerted.
When you return the alerted pager back to the charger base, it’ll stop alerting.