Chung Nam Electronics Co. Ltd. WLC301GRSM Benutzerhandbuch
User Manual
11
● Fragment Threshold – Default is 2312.
● Ad-hoc mode – Displays the wireless mode, either Only 802.11B or 802.11B/G mode.
● Channel – Shows the current channel in use. This field determines which operating
frequency will be used.
2. Edit the Authentication and Security tab
frequency will be used.
2. Edit the Authentication and Security tab
Figure 3-3 Add Profile – configuration
● Authentication Type – Three options, Open System, Shared-Key System or LEAP.
● 802.1x Setting – It enables when Authentication Type is setting to WPA.
● Encryption – Displays which encryption type that the driver is using. When you select
Open System, Shared-Key System as Network Authentication, there are two options: WEP
and None. If you select WPA-PSK as Network Authentication, there are TKIP and AES
options instead of WEP and None.
● Wep Key – Key #1, Key #2, Key #3, Key #4, the Key groups. You can enter 10 hexadecimal
digits (any combination of 0-9, a-f, A-F) or 5 ASCII characters for 64-bit (also called 40bits)
and None. If you select WPA-PSK as Network Authentication, there are TKIP and AES
options instead of WEP and None.
● Wep Key – Key #1, Key #2, Key #3, Key #4, the Key groups. You can enter 10 hexadecimal
digits (any combination of 0-9, a-f, A-F) or 5 ASCII characters for 64-bit (also called 40bits)