ZTE Corporation ZTECS130 Benutzerhandbuch
7
Earphone
Keypad locked
Roaming
New message
New urgent message
Ringer with vibration
Vibration
Silence All
Alarm
Power indicator
2.3 Technical Parameters
Handset
Type
ZTE-C
S130
Dimensions
(
Height×Width×Thickness)
104.4mm×45.8mm×14.2mm
Weight
About 72g(Battery Included)
Battery
Continuous standby time
About 270-330h (Subject to Network)
Continuous talk time
Above 400min (Subject to Network)
Note: Please refer to the real phone for other relative parameters of the battery and
charger.
2.4 Battery
The attached Li-ion battery along with the phone can be used after unpacking. For the first
three times, please use up the power and charge it fully for a new battery to perform well.
2.4.1 Removing and Installing the Battery
Remove:(1) Put finger on the bottom finger grip, and then lift the back-cover of the phone up
to release and remove. (2) Put finger on the top finger grip, and then lift up the battery to
remove the battery.
to release and remove. (2) Put finger on the top finger grip, and then lift up the battery to
remove the battery.
Install:(1) Replace the battery into the battery slot, to be noted that the lower end of the
battery firstly inserted. (2) Put the back-cover of the phone flatly upon the body of phone.
Direct the back cover towards the locking catches on the top/sides of the phone and push
the back-cover of the phone to lock the cover into its place.
battery firstly inserted. (2) Put the back-cover of the phone flatly upon the body of phone.
Direct the back cover towards the locking catches on the top/sides of the phone and push
the back-cover of the phone to lock the cover into its place.