ZTE Corporation ZTEMY39 Benutzerhandbuch

                                                                     

内部公开▲

 

                                             

 

 

 

 

2. Insert the ZTE MY39 into your laptop’s PC Card Slot with the label facing up. Adjust the 

antenna to horizontal level when the netcard is not in use. Rotate the antenna to 90° angle to 

ensure it can get the best intensity of the receiving signal. 

3. Once you have inserted the card properly, your Windows operating system will notify 

that new hardware has been detected.                    

 

               

 

4. Insert the netcard into the laptop’s card slot, if it works normally, the LED will light after 5s or 

6s. If the LED does not light, it indicates that the laptop does not insert properly or there exists 

some malfunction with the netcard or laptop. 

 

 

 

2.5  Safe removal of Hardware 

1.  Close the software. Right click the tray icon circled below and left click close. 

 

 

 

 

Retransmission and reproduction in any manner whatsoever without the permission of ZTE is strictly forbidden. All rights reserved. 

 

9