Kontron Embedded Technology Inc REVOLUTION-V3 Benutzerhandbuch
ReVolution User Manual 1.00
06/09/03
67
Load Setup Defaults
To display the default values for all the Setup menus, select "Load Setup Defaults" from the Main Menu. The program
displays this message:
displays this message:
ROM Default values have been loaded!
Press <space> to continue
Press <space> to continue
If, during bootup, the BIOS program detects a problem in the integrity of values stored in CMOS, it displays these
messages:
System CMOS checksum bad - run SETUP
Press <F1> to resume, <F2> to Setup
Press <F1> to resume, <F2> to Setup
The CMOS values have been corrupted or modified incorrectly, perhaps by an application program that changes data
stored in CMOS. Press <F1> to resume the boot or <F2> to run Setup with the ROM default
values already loaded into the menus. You can make other changes before saving the values to CMOS.
Discard Changes
If, during a Setup Session, you change your mind about changes you have made and have not yet saved the values
to CMOS, you can restore the values you previously saved to CMOS. Selecting “Discard Changes” on the Exit menu
updates all the selections and displays this message:
to CMOS, you can restore the values you previously saved to CMOS. Selecting “Discard Changes” on the Exit menu
updates all the selections and displays this message:
CMOS values have been loaded!
Press <space> to continue
Press <space> to continue
Save Changes
Selecting “Save Changes” saves all the selections without exiting Setup. You can return to the other menus if you
want to review and change your selections.
want to review and change your selections.