Linksys WPSM54G Benutzerhandbuch
61
Appendix C: About Bi-Directional Printing
Wireless-G PrintServer with Multifunction Printer Support
Appendix C: About Bi-Directional Printing
Normal printing only sends print signals from a PC to a printer. Bi-directional printing, also called bitronic printing,
refers to a printer’s ability to do just the opposite—talk back to a PC to notify it of a print job status, paper jams, etc.
This two-way communication technology can be found in HP, IBM, Panasonic, and other laser or color printers where
close contact between the PC and printer is key. In color printing, for example, the printer “informs” the PC of its
constant status in order to mix color inks correctly for optimal quality output.
refers to a printer’s ability to do just the opposite—talk back to a PC to notify it of a print job status, paper jams, etc.
This two-way communication technology can be found in HP, IBM, Panasonic, and other laser or color printers where
close contact between the PC and printer is key. In color printing, for example, the printer “informs” the PC of its
constant status in order to mix color inks correctly for optimal quality output.
Bi-directional communication, communication from a printer to a PC, is normally handled by a combination of the
printer hardware and special software on your computer. Using a bi-directional printer on a network poses unique
challenges. Unlike a direct PC-to-printer connection during which a bi-directional printer can easily send its signals
back to the host PC through the computer’s parallel or USB port (which is normally located only a few feet away from
the printer), a networked printer faces the problem of having to route messages bound for a particular PC through a
large array of hubs, switches, file servers, and computers. Unfortunately, most printers are not equipped to handle the
complexities of printer-to-PC communication across a network. That does not mean that they can’t be used on a
network, however.
printer hardware and special software on your computer. Using a bi-directional printer on a network poses unique
challenges. Unlike a direct PC-to-printer connection during which a bi-directional printer can easily send its signals
back to the host PC through the computer’s parallel or USB port (which is normally located only a few feet away from
the printer), a networked printer faces the problem of having to route messages bound for a particular PC through a
large array of hubs, switches, file servers, and computers. Unfortunately, most printers are not equipped to handle the
complexities of printer-to-PC communication across a network. That does not mean that they can’t be used on a
network, however.
Linksys designed the PrintServers to function with both regular as well as bi-directional printers. However, the
PrintServer cannot pass messages from the printer back to the printing PC—this limitation is simply an industry
standard, and not one of the PrintServer itself.
PrintServer cannot pass messages from the printer back to the printing PC—this limitation is simply an industry
standard, and not one of the PrintServer itself.
However, the PrintServer can check any printer’s online and printing status on the network using the Bi-Admin
management utility software packaged with the PrintServer. The status-checking feature built into the management
software does not require a bi-directional printer to function. If your printer came with special bi-directional software
allowing you to monitor printer status, do not use it with the PrintServer—the software is most likely not network-
capable. For best results, turn off the printer’s bi-directional function either by (1) removing any bi-directional printing
software from your network computers, and/or (2) turning off the printer’s bi-directional print feature inside of the
printer’s on-board menus (if it has menus). Your printer’s user guide should be able to provide specific instructions for
doing this.
management utility software packaged with the PrintServer. The status-checking feature built into the management
software does not require a bi-directional printer to function. If your printer came with special bi-directional software
allowing you to monitor printer status, do not use it with the PrintServer—the software is most likely not network-
capable. For best results, turn off the printer’s bi-directional function either by (1) removing any bi-directional printing
software from your network computers, and/or (2) turning off the printer’s bi-directional print feature inside of the
printer’s on-board menus (if it has menus). Your printer’s user guide should be able to provide specific instructions for
doing this.