Cardo Systems AWHS01 Benutzerhandbuch
This section is only applicable for
users who have purchased
theuniversal BT Adapter
users who have purchased
theuniversal BT Adapter
8.Getting started with the
allways
allways
™
BT Adapter and Headset
Turning On/Off
Press and hold the CONTROL (CTRL)
button for at least 3 seconds until the
blue light indicator flashes and an alert
tone is heard. Release the button. If you
have not completed pairing and this is
the first time you have turned ON the
device, the blue light indicator will start
flashing rapidly (3 times per second),
indicating that the device is in pairing
mode. Please read the pairing mode
section 5.2 for further details.
Press and hold the CONTROL (CTRL)
button for at least 3 seconds until the
blue light indicator flashes and an alert
tone is heard. Release the button. If you
have not completed pairing and this is
the first time you have turned ON the
device, the blue light indicator will start
flashing rapidly (3 times per second),
indicating that the device is in pairing
mode. Please read the pairing mode
section 5.2 for further details.
If the device is already paired, the blue
light indicator will start flashing slowly
(one flash every 5 seconds), indicating that
the device is in standby mode.
light indicator will start flashing slowly
(one flash every 5 seconds), indicating that
the device is in standby mode.
To turn off, press and hold the CTRL button
for at least 3 seconds until the red light
indicator flashes and an alert tone is heard.
Release the button.
for at least 3 seconds until the red light
indicator flashes and an alert tone is heard.
Release the button.
Pairing the Adapter and Headset
Pairing is a required process in which the
allways
Pairing is a required process in which the
allways
™
Headset and BT Adapter
become acquainted with each other for
the first time. At the end of this process
both devices retain information about
the first time. At the end of this process
both devices retain information about
each other, so the next time you turn one
of them on, it will look for the other
device and will be able to operate
automatically with it. Pairing is required
only the first time for a specific allways™
Headset and BT Adapter.
of them on, it will look for the other
device and will be able to operate
automatically with it. Pairing is required
only the first time for a specific allways™
Headset and BT Adapter.
Pairing Headset and BT Adapter
• Turn on the Headset and BT Adapter.
• Turn on the Headset and BT Adapter.
• Press and hold the CTRL button of the
Headset for at least 8 seconds until the
Blue light indicator starts flashing rapidly
(3 flashes per second). Release the button.
Headset for at least 8 seconds until the
Blue light indicator starts flashing rapidly
(3 flashes per second). Release the button.
Note: As you press the CTRL button while
performing the above procedure you will
notice that the light indicator turns red
after 3 seconds. Do not release button
yet, and wait until the blue light indicator
flashes rapidly.
performing the above procedure you will
notice that the light indicator turns red
after 3 seconds. Do not release button
yet, and wait until the blue light indicator
flashes rapidly.
• Upon successful completion of the
procedure, your allways
procedure, your allways
™
Headset & BT
Adapter should start blinking in blue every
5 seconds (slow blinking). Now, as your
pairing process is complete, you are able
to use your allways
5 seconds (slow blinking). Now, as your
pairing process is complete, you are able
to use your allways
™
Headset in
conjunction with your BT Adapter.
Linking Headset to a Paired BT Adapter
If you have already paired your Headset
to a BT Adapter before and you have
subsequently lost radio link between the
units (due to distance in excess of 30 ft.
or 10m, or because either the Headset or
If you have already paired your Headset
to a BT Adapter before and you have
subsequently lost radio link between the
units (due to distance in excess of 30 ft.
or 10m, or because either the Headset or
Headset Manual 19
Adapter