SendFar Technology Co. Ltd. OAP-02002 Benutzerhandbuch

14

－

 MAC Filter

▽ 

Running Status

● 

System Info

● 

DHCP Info

● 

Station Info

● 

Statistic Info

▽ 

Utility

● 

Software Upgrade

● 

Administration

Move through the tree by clicking on an icon to expand or collapse the tree.
The nodes on the tree represent web pages that allow you to view and
modify the parameters.

15

Since each network is unique, the OWAP must be configured to operate in
your network environment. Before configuring the OWAP, you need to
know the role of the OWAP on your network.

The OWAP can be configured into four operation modes:

1.  Wireless Access Bridge
2.  Wireless Router with PPPoE Client Ethernet connection
3.  Wireless Router with DHCP Client Ethernet connection
4.  Wireless Router with Static IP Ethernet connection

This section will describe a 5-step configuration to setup your Outdoor
Wireless Access Point (OWAP) workable.

1.  Select an operation mode for your OWAP on the web page “/General

Config/System/”, 

and click  FINISH  to refresh this page

.

2.  Modify the factory-set default parameters on the web page “/General

Config/System/”page, and click  FINISH  to save your changes.

3.  Modify the factory-set default parameters on the web page “/General

Config/Wireless/”page, and click  FINISH  to save your changes.

4.  (Optional) Modify others parameters on the web page “/General

Config/”page, and click  FINISH  to save your changes.

5.  Move on page “/Utility/Administration/”, select the 

and then click  FINISH  to take effect the previous configuration
changes.