SendFar Technology Co. Ltd. ORB-02001 Benutzerhandbuch

28 

Sometimes, the operator want to managing a large TCP/IP network 
requires maintaining accurate and up-to-date IP address and domain name 
information. In this situation, it needs manually configure and enable the 
DHCP server service. Select the

and then the 

General Configuration – DHCP Parameter screen appears.  Figure 4-5 
shows the general DHCP parameters and the fixed host entry table. 
(Default fixed host entry pool is empty). 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 

29 

 

 

Select Enable to allow the RB to assign 

IP Addresses from IP Pool Table. Select Disable to prevent IP Address 
assignment from the RB

 

 

- Default Gateway. Enter the default Gateway IP Address.  
 
- Subnet Mask. Configure the subnet for the client.  
 
- Name Server 1, 2, 3. Configure the DNS servers IP for the client. 
 
- DHCP Start IP address. Enter the starting IP Address for this IP Pool 
Table.  
 
- DHCP End IP address.  Enter the ending IP Address for this IP Pool 
Table.  
 
- Apply Interface. Enable DHCP server service on Wireless or Ethernet 
interface. 
 
 
 

Figure 4-5 shows the general DHCP parameters and the fixed host entry 
table. (Default fixed host entry pool is empty). 
 

1. Click  Add . The Fixed Host Entry Edit page Figure 4-6 appears. 

2.  To edit the Fixed Host Entry, specify the Ethernet and Internet Address 

fields. 

 
- Ethernet Address. Enter the MAC address for a fixed IP user. 
 
- Internet Address. Assign a fixed IP Address to this special user.  
 

3. Click  OK . The Fixed Host Entry Table appears with the entries list. 

4.  To modify or delete a fixed host entry, click the select button beside the 

entry index number and click  Modify  or  Delete .