Shanghai Yaming Lighting Co. Ltd. YPZ120-2 Benutzerhandbuch

 

This light device has been tested and found to comply with the limits for Consumer RF 

Lighting Device, pursuant to Part 18 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular installation. 

1.  Use only on 120 volt, 60 hertz. 

2.  Never disassemble or modify-any changes could void the user’s authority to operation this 

device. 

3.  Not for use in totally enclosed fixtures. 

4.  Risk of electric shock-do not use where directly exposed to water. 

5.  This device is not intended for use with emergency exit fixtures or emergency exit lights. 

6.  This product could produce interference when used near 1 TV, radio, wireless remote 

control or maritime safety communications equipment or other critical navigation or 

communication equipment operating between 0.45-30 MHz. If interference should occur, 

move the lamp away from the appliance of three feet or more. Or, plug the lamp or the 

appliance into a different outlet. 

7.  To prevent burns, do not touch the bulb during operation or immediately after switching 

off. 

8.  Not for use with dimmers, electronic timer or photocell devices or occupancy sensor.