Promethean 007 Benutzerhandbuch
proACTIV board User Guide
9
Projector
Recommendations
VGA or better video capabilities when used with an LCD projector. The LCD can
only be used to its maximum resolution and color depth when the video output
only be used to its maximum resolution and color depth when the video output
of your computer (video board) matches the LCD manufacturer’s
recommendation for the specific model you are using. The proACTIV board has
recommendation for the specific model you are using. The proACTIV board has
no upper limit to resolve your projected image or color depth other than the
limits of the LCD projector in use.
limits of the LCD projector in use.
Preparation
Set up your LCD projection equipment and connect to your computer according
to the instructions supplied with those components.
to the instructions supplied with those components.
Framing the Screen Image
Note: The active surface of the proACTIV board extends from edge to
edge, so your ACTIVpen will work anywhere on the proACTIV
board surface
board surface
Switch your projector on and project the screen image onto the proACTIV
board. Position the image and adjust the size so the image falls within the edge
strip, which is fitted around the edge of the proACTIV board.
strip, which is fitted around the edge of the proACTIV board.
Additional LCD Projector Adjustment
Most LCD projectors have a framing control that may require adjusting
manually. Additionally, many projectors have an auto image feature, which will
manually. Additionally, many projectors have an auto image feature, which will
automatically adjust the image size and match the display to your computer
graphics card. This is to ensure the screen image is not clipped at the top,
graphics card. This is to ensure the screen image is not clipped at the top,
bottom or edges. Consult your LCD Projector manual if you are not familiar
with this control feature.
with this control feature.
Note: Perform the auto image or framing control procedure before
calibrating the proACTIV board.