Lee Technology Korea Co. Ltd. LT2009A Benutzerhandbuch
LEE Technology Korea Co., Ltd.
Top View Paging System User Manual
1. EQUIPMENT SETUP
1) Charger Setup
(1) Remove contents of box and be sure you have all the necessary hardware:
Pagers, Chargers, power supplies and etc.
(2) You may wish to keep the holders flat on a table or mount them
perpendicular to a wall.
Plug the power supply into a standard wall outlet and plug the other end
into either hole on the side of the Charger Base.
If using more than 15 Pagers connect the Chargers together as shown using
the power supply and jumper wires.
Plug the power supply into a standard wall outlet and plug the other end
into either hole on the side of the Charger Base.
If using more than 15 Pagers connect the Chargers together as shown using
the power supply and jumper wires.
2) Pager Charging
※ CHARGE YOUR PAGERS FOR 8 HOURS PRIOR TO USE
(1) Insert your Top‐View Pagers into the slot of the Charger.
(2) The red light should come in front of each Pager indicating that it is charged
properly. Be sure all red lights with Pagers come on when a Pager is inserted
into the slot.
into the slot.
(3) If no light comes on, check your wires and be sure the Chargers are plugged in
using the included power supply.
(4) If some lights come on and others do not, be sure the jumper wires are
installed properly (each side alternates jumpers). Please refer to Charger
Hookup above.
Hookup above.
Charger Base
(1 per 15 pagers)
W/ Power Supply
DC12V 2.5A