Lee Technology Korea Co. Ltd. LTK-2003 Benutzerhandbuch
LTK-2003 Paging System User manual
Thank you for purchasing the “LTK-2003Rechargeable Pager & LeeTek Transmitter” On Premise Paging
System. Your pagers were set at the factory and will function as soon as they are turned on.
System. Your pagers were set at the factory and will function as soon as they are turned on.
Keypad Sending Unit:
Unwrap all controller components. Lock the antenna into the hole in the upper left hand corner of the
controller and slip on the antenna locking cover. Plug the power supply into a standard 110 outlet and
plug it into the back of the controller. We recommend some type of surge suppressor on the power
supply for protection. If using a telephone interconnect model please refer to the “Telephone
Interconnect Operation” sheet enclosed.
Pager Numbers:
On the clip of each pager is your pager number. Press the pager number and send (“11 send”) and
that pager will vibrate& flash for 3 minutes. Remember to make a note of the pager number next to
the name on the pager sign out sheet.
To Send a Distinctive Vibration
With this feature you have the option of sending different alerts to a pager.
Unwrap all controller components. Lock the antenna into the hole in the upper left hand corner of the
controller and slip on the antenna locking cover. Plug the power supply into a standard 110 outlet and
plug it into the back of the controller. We recommend some type of surge suppressor on the power
supply for protection. If using a telephone interconnect model please refer to the “Telephone
Interconnect Operation” sheet enclosed.
Pager Numbers:
On the clip of each pager is your pager number. Press the pager number and send (“11 send”) and
that pager will vibrate& flash for 3 minutes. Remember to make a note of the pager number next to
the name on the pager sign out sheet.
To Send a Distinctive Vibration
With this feature you have the option of sending different alerts to a pager.
Handing out the Pagers:
Give the guest a Pager. Note their name and Pager number on the sign out sheet(Included).
Tell the guest the Pager will signal when their table(or Food) is ready. The default page for this
system is for the coaster to flash and vibrate for 3 minutes. After the Pager is finished vibrating it
automatically goes back into standby mode waiting for the next page. You can hand the Pagers out
right from the charging Base (They will “demo” Page each time they are removed from the Charging
base) or you can simply store them in a basket and hand them out. A fully Charged Pager will
function without being recharged for 8 – 12 hours.
Paging the Guest:
When the guest’s table( or food) is ready simply press the Pager number on the transmitter
Keypad followed by the “send” key. For example. Press “11, send” and Paser # 11 will signal.
Out of range Feature(Alert 2 Type)
With this feature, the pager will play a Beep (or Blinking YELLOW Light & Fast Vibe Mode)to inform
your customer that they are out of range and will miss their page. The melody will only stop if they are
within range. The Out of Range Molody will play for 10minutes only.
Default from the factory is Out of Range Off
Message Code
Out of Range On “9494” Melody for 10minutes only
Give the guest a Pager. Note their name and Pager number on the sign out sheet(Included).
Tell the guest the Pager will signal when their table(or Food) is ready. The default page for this
system is for the coaster to flash and vibrate for 3 minutes. After the Pager is finished vibrating it
automatically goes back into standby mode waiting for the next page. You can hand the Pagers out
right from the charging Base (They will “demo” Page each time they are removed from the Charging
base) or you can simply store them in a basket and hand them out. A fully Charged Pager will
function without being recharged for 8 – 12 hours.
Paging the Guest:
When the guest’s table( or food) is ready simply press the Pager number on the transmitter
Keypad followed by the “send” key. For example. Press “11, send” and Paser # 11 will signal.
Out of range Feature(Alert 2 Type)
With this feature, the pager will play a Beep (or Blinking YELLOW Light & Fast Vibe Mode)to inform
your customer that they are out of range and will miss their page. The melody will only stop if they are
within range. The Out of Range Molody will play for 10minutes only.
Default from the factory is Out of Range Off
Message Code
Out of Range On “9494” Melody for 10minutes only
“9191” Blinking Yellow light & Fast Vibration Mode for 10minutes.
Out of Range OFF “9393”
To turn the Out of range feature an follow these procedures:
Remove all the Pagers from the charging base or simply unplug the power supply that is connected to
the charging unit. Press “911-enter- 9494-send”. or “911-enter- 9191-send”.
All the Pagers will light up to tell you that they have received the new code. To test the Pagers,
unplug the power supply that is connected to the LEETEK transmitter. After 45 seconds, all the
Pagers will play a melody since they are not receiving a signal from the transmitter
(Alert will 10minutes only). Return all the Pagers to the charging base or plug in the power supply.
The Pagers are ready to receive a page with the out of range feature turned on.
To turn the Out of range feature an follow these procedures:
Remove all the Pagers from the charging base or simply unplug the power supply that is connected to
the charging unit. Press “911-enter- 9494-send”. or “911-enter- 9191-send”.
All the Pagers will light up to tell you that they have received the new code. To test the Pagers,
unplug the power supply that is connected to the LEETEK transmitter. After 45 seconds, all the
Pagers will play a melody since they are not receiving a signal from the transmitter
(Alert will 10minutes only). Return all the Pagers to the charging base or plug in the power supply.
The Pagers are ready to receive a page with the out of range feature turned on.