Lee Technology Korea Co. Ltd. LTK-UP1 Benutzerhandbuch
*b0-b1 & lights blinking – unit may not operate properly & the battery requires replacement
4. SETTING THE SCUBUZZ ID
Each pager needs to be programmed to the same ID as it’s buddy so they may communicate
without interfering with other SCUBuzz users nearby. You can program individual ID’s so two
buddies can communicate as well as a team ID so a group of divers can communicate if needed.
- Press and hold the A & B button for 3 seconds (3 lights will blink in sequence) to enter
programming mode.
- The SCUBuzz ID consists of 4 numeric digits. The first 2 digits are the individual ID (01-30)
and the last 2 digits are the Team ID (81-99).
- Change the first digit by pressing the A button. After the desired ID is set press the B button
to scroll to the next digit.
- After setting the 4 digit numeric ID, press and hold the A button for 3 seconds to save the ID.
- Complete the same process for the buddy pager using the same ID numbers.
5. SETTING THE SCUBUZZ ALARM
SCUBuzz has 3 timer alarms (A1-A3) that you can set to alert you at certain intervals.
- Press the A & B buttons simultaneously. The display will show the first alarm setting “A100”.
A1 is used to set alarm 1 and the last 2 digits (00) are the alarm time in minutes.
- To set the time (in minutes), press the A button. Minutes are set in the multiples of 5. For
example if you want the alarm to be set for 1 hour the display should show “A160”.
- Once the alarm setting is set, press the B button to save it. The display will show the 2
nd
alarm setting (A200). Complete the same procedure as above to set the minutes. NOTE: If
you only care to set one alarm, press the B button twice to skip the next 2 next alarms(A2 &
A3).
6. SENDING INDIVIDUAL BUDDY PAGES
- Press and hold the B button for 2 seconds (one light will illuminate). All pagers within range
that have the same ID (individual) will light and vibrate. -The alert will continue for 2 minutes
or until cancelled.
-
To cancel the page on the receiving SCUBuzz, press the B button once.