Redline Communications Inc. AN100UA Benutzerhandbuch
Red
MAX
™
Base Station
User Manual
Doc. #70-00058-01-01
Proprietary Redline Communications © 2007
July 13, 2007
Page 28 of 117
Mgt Port Act (100) LED
The 100 LED lights solid green when the Mgt port is operating at 100 Mbps. The LED is
off when operating at 10 Mbps.
off when operating at 10 Mbps.
Table 10: System - Ethernet Mgt Port Act LEDs
LED
Description
ON
Ethernet interface is operating at 100 Mbps.
OFF
Ethernet interface is operating at 10 Mbps.
3.1.5 System
Section
This section describes other general features of the front panel.
System LEDs
The System LEDs indicate power supply status and system faults.
Figure 9: System - System LEDs and Reset Switch
System Pwr LED
The Pwr LED lights green to indicate normal operation.
Table 11: System - Pwr LED Indications
LED
Description
ON Normal
operation.
FLASH
One of the dual AC/DC power supplies is off.
OFF
System is turned off.
System Fault LED
The Fault LED lights red when a serious fault is detected.
Table 12: System - Fault LED Indications
LED
Description
OFF Normal
operation.
FLASH
Only one of the dual power supplies is
operational.
operational.
ON
Serious problem with the system hardware. Refer
to the Troubleshooting section.
to the Troubleshooting section.