Redline Communications Inc. AN80IA Benutzerhandbuch
Red
CONNEX
TM
AN-80i
PMP
User Manual
70-00072-01-03
Proprietary Redline Communications © 2007
March 19, 2007
Page 56 of 60
6.3.3 5.4 GHz Radio: FCC & IC Certified Antennas
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 22 dB. Antennas not included in this list or having a gain greater than
22 dB are strictly prohibited for use with this device. The required antenna impedance is
50 ohms.
maximum gain of 22 dB. Antennas not included in this list or having a gain greater than
22 dB are strictly prohibited for use with this device. The required antenna impedance is
50 ohms.
Table 28: Spec. - FCC & IC Certified Antennas: 5.4 GHz Operation
Redline PN
Ant. Gain
(dBi)
Antenna Type
App.
GUI
Setting
48-00021-02 22
9 Degree
5.15-5.875 GHz
Directional Flat Panel
5.15-5.875 GHz
Directional Flat Panel
PTP -3
Note: The RF output power and selection must be professionally programmed and
installed by the manufacturer or a trained professional installer.
6.3.4 5.8 GHz Radio: FCC & IC Certified Antennas
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 34.6 dB. Antennas having a gain greater than 34.6 dB are strictly
prohibited for use with this device. The required antenna impedance is 50 ohms. The
following table lists FCC and IC certified antennas:
maximum gain of 34.6 dB. Antennas having a gain greater than 34.6 dB are strictly
prohibited for use with this device. The required antenna impedance is 50 ohms. The
following table lists FCC and IC certified antennas:
Table 29: Spec. - FCC & IC Certified Antennas: 5.8 GHz Operation
Redline PN
Ant.
Gain
(dBi)
(dBi)
Antenna Type
App.
Minimum
Conducted
Power
(dBm)
(dBm)
Max
Conducted
Power
Ratings
(dBm)
Average
GUI Power
Display
(dBm)
FCC Max
EIRP
(dBm)
48-00021-02 22
9 Degree
5.15-5.875 GHz
Directional Flat Panel
5.15-5.875 GHz
Directional Flat Panel
PTP -12.7 26.2
20 No
Limit
48-00030-00 22
12 Degree
5.250-5.850 GHz
Directional Parabolic
5.250-5.850 GHz
Directional Parabolic
PTP -12.7 26.2
20 No
Limit
48-00024-00 28
4.5 Degree
5.15-5.875 GHz
Directional Flat Panel
5.15-5.875 GHz
Directional Flat Panel
PTP -12.7 26.2
20 No
Limit
48-00031-00 28
6.2 Degree
5.250-5.850 GHz
Directional Parabolic
5.250-5.850 GHz
Directional Parabolic
PTP -12.7 26.2
20 No
Limit
48-00032-00 31.2
4.2 Degree
5.250-5.850 GHz
Directional Parabolic
5.250-5.850 GHz
Directional Parabolic
PTP -12.7 26.2
20 No
Limit
48-00033-00 34.6
3.4 Degree
5.250-5.850 GHz
Directional Parabolic
5.250-5.850 GHz
Directional Parabolic
PTP -12.7 26.2
20 No
Limit
Note: The RF output power and selection must be professionally programmed and
installed by the manufacturer or a trained professional installer for compliance with
FCC requirements of maximum EIRP of 34.6 dBm.
FCC requirements of maximum EIRP of 34.6 dBm.