Redline Communications Inc. AN80IB Benutzerhandbuch
User
AN-80i
Manual
70-00072-01-06a
Proprietary Redline Communications © 2008
Page 90 of 96
June 1, 2008
5.4 GHz Radio: FCC & IC Certified Antennas
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 22 dBi. Antennas not included in this list or having a gain greater than
22 dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms. The following table lists FCC and IC certified antennas:
maximum gain of 22 dBi. Antennas not included in this list or having a gain greater than
22 dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms. The following table lists FCC and IC certified antennas:
Table 48: Spec. - FCC & IC Certified Antennas: 5.4 GHz Operation
Redline PN
Gain
(dBi)
Antenna Type
App.
Tx Power
Setting
48-00048-01
9
360 degree, 5.0 - 6.0 GHz, omni directional
PMP
13
48-00065-00
15
120 degree, 4.9-5.9 GHz, sector flat panel
PMP
9
48-00066-00 16.6
90 degree, 4.9-5.9 GHz, sector flat panel
PMP
7
48-00067-00 17.5
62 degree, 4.9-5.9 GHz, sector flat panel
PMP
5
48-00021-02
22
9 degree, 5.15-5.875 GHz, sector, flat panel
PTP
-1
5.25 - 5.35 GHz Radio: FCC & IC Antennas
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 22 dBi. Antennas not included in this list or having a gain greater than
22 dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms. The RF output power and selection must be professionally programmed and
installed by the manufacturer or a trained professional installer. The following table lists
FCC* and IC certified antennas:
maximum gain of 22 dBi. Antennas not included in this list or having a gain greater than
22 dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms. The RF output power and selection must be professionally programmed and
installed by the manufacturer or a trained professional installer. The following table lists
FCC* and IC certified antennas:
Table 49: Spec. - FCC & IC Antennas: 5.25 - 5.35 GHz Operation
Tx Power Setting
Tx Peak Conducted
Power (dBm)
Channel Size (MHz)
Channel Size (MHz)
Redline Part
Number
Gain
(dBi)
(dBi)
Description App.
10 20 40 10 20 40
48-00048-01
9
360 degree, 5.0 - 6.0 GHz,
omni directional
PMP
12 14 N/A 20 21 N/A
48-00065-00
15
120 deg., .9-5.9 GHz,
sector flat panel
sector flat panel
PMP 6 8 N/A 21 22 N/A
48-00066-00 16.6 90 deg., 4.9-5.9 GHz,
sector flat panel
PMP 5 7 N/A 21 22 N/A
48-00067-00 17.5 62 deg., 4.9-5.9 GHz,
sector flat panel
PMP 4 6 N/A 20 22 N/A
48-00021-02
22
9 degree, 5.15-5.875 GHz,
sector, flat panel
PTP
-4 -2 -1 17 19 20
* FCC regulations require the DFS function be permanently enabled at the factory
and can not be disabled by the installer/end-user when operating in the 5.25-5.35
GHz range.