Redline Communications Inc. SC1000E Benutzerhandbuch
User
BASE
STATION
Manual
Doc #70-00100-01-00-DRAFT
Proprietary Redline Communications © 2009
Page 40 of 60
January 7, 2009
6.2
Recovering a Lost IP Address
Use a serial cable to access the base station serial console. The configuration of the
serial port should be 115,200 bps, no parity, 8 data bits, and 1 stop bit. Use the CLI
commands to restore the IP address to a known value.
serial port should be 115,200 bps, no parity, 8 data bits, and 1 stop bit. Use the CLI
commands to restore the IP address to a known value.
Figure 15: Op - Management Terminal Connections