Zebra Technologies Corporation PAL650 Benutzerhandbuch
2
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
is connected.
Consult the dealer or an experienced radio/TV technician for help.
3. Installation and Operating Instructions
The first step in installing the PAL-650 system is to locate and position the passive PAL-650
Receivers.
Receivers.
Note: The PAL-650 Receivers must only be operated indoors
and with their directional antennas facing inwards, in order to
ensure compliance with FCC Part 15.517.
For optimum performance, the PAL-650 Receiver locations should be chosen so as to provide
adequate coverage of the area of interest. Typical ceiling mountings for the Receivers are
illustrated in Figures 1 and 2 below.
adequate coverage of the area of interest. Typical ceiling mountings for the Receivers are
illustrated in Figures 1 and 2 below.
Figure 1. Typical ceiling mount for PAL-650 Receiver. Note placement of directional
antenna (pointing inwards).
Figure 2. Another typical ceiling mount for PAL-650 Receiver.