Airaya Corp AI108 Benutzerhandbuch
- 5 -
Regulatory Information
FCC and Industry Canada Guidelines
The radiated output power of the AI108 wireless bridge is far below the FCC radio
frequency exposure limits. Nevertheless, the device shall be used in such a manner
that the potential for human contact during normal operation is minimized. It is the
responsibility of the installer and users of the AI108 wireless bridge to guarantee that
the antenna is operated at least 20 centimeters (8 inches) from any person. This is
necessary to insure that the product is operated in accordance with the RF Guidelines
for Human Exposure, which have been adopted by the Federal Communications
Commission.
The built-in antennas used on the AI108 may NOT be replaced at any time. They are
necessary to insure that the product is operated in accordance with the RF Guidelines
for Human Exposure, which have been adopted by the Federal Communications
Commission.
The built-in antennas used on the AI108 may NOT be replaced at any time. They are
designed to comply with the maximum EIRP limits specified by the FCC and Industry
Canada. Modifications to the AI108, unless expressly approved by AIRAYA, could void
the user's authority to operate the equipment.
The AI108 wireless bridge operates in the frequency range of 5.25 to 5.35 GHz. High
Canada. Modifications to the AI108, unless expressly approved by AIRAYA, could void
the user's authority to operate the equipment.
The AI108 wireless bridge operates in the frequency range of 5.25 to 5.35 GHz. High
power radar systems in both Canada and the United States are allocated as primary
users of this spectrum. These radars can cause interference and/or damage to
devices such as the AI108 wireless bridge when used outdoors.
The term “IC:” before the radio certification number only signifies that Industry
users of this spectrum. These radars can cause interference and/or damage to
devices such as the AI108 wireless bridge when used outdoors.
The term “IC:” before the radio certification number only signifies that Industry
Canada technical specifications were met.
Class A Digital Compliance
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
digital device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.