Airaya Corp GRID-3X3 Benutzerhandbuch
- 12 -
Airaya
WirelessGRID-300 Backhaul Radios
Hardware Installation
Connecting the Indoor Injector Unit
Figure 5. Network and outdoor connection views
The indoor injector unit connects your company network to the outdoor
portion of the WirelessGRID-300 bridge and delivers both data and
power. The indoor portion of the remote power system features the
following LED status indicators:
following LED status indicators:
LED
Indication
Power Brick LED
(green)
Power source is active and supplying 48 volts to the indoor
injector unit
Injector 48V out
(green)
Power Over Ethernet is active and the injector is hot at the
48V Out+ Signal port
Before you mount the indoor Injector unit at a fixed location, consider the
following requirements to determine optimal placement:
following requirements to determine optimal placement:
·
The cable length from the Ethernet switch or router to the
outdoor unit must not exceed 328 feet (100 meters).
·
Placement must allow for easy access to disconnect the
indoor injector unit from the AC outlet if necessary.
indoor injector unit from the AC outlet if necessary.