Airaya Corp GRID-C Benutzerhandbuch

 

Airaya

 – Fast and affordable outdoor wireless bridges

 

 

 
Before installing the WirelessGRID bridge, be sure you have the following 

items on-hand: 
 

 An AC power outlet (100 to 240 V, 50 to 60 Hz) to supply power to 

the indoor injector units on both sides of the wireless link 

 An outdoor unit mast with a 1 to 6 inch (25.4 to 152.4 mm) 

diameter 

 An available RJ-45 (UTP) port on a 10/100 Mbps Ethernet switch or 

router 

 Web browser for software configuration 

 
The WirelessGRID bridge has been designed to withstand normal handling 

procedures, but reasonable precautions should be taken during 
installation, particularly with regard to static discharge.   
 

• 

Make sure that you are adequately grounded by touching the bare 

metal surface on the back of a computer or networking device 
before installing the indoor and outdoor units. 

• 

Avoid moving around the work area in order to eliminate static 
charge buildup. 

• 

If possible, do not work on a carpeted area. 

 

 

- 12 -