Airaya Corp GRID-C3 Benutzerhandbuch

 

Airaya

 – Fast and affordable outdoor wireless bridges

 

 

 
 

 

 
 

 

Figure 5. Front and 

rear panel views 

 

 
 

 
 
 
 
 

 
 

 

The AI108-4958-N, AI108-4958-1, or AI108-SU connect to your network with a 
standard 100/10 Mbps Ethernet cable; and connects to the outdoor antenna 

using an RF cable. The AI108-4958-N, -1, -SU units features the following LED 
status indicators: 

 
 

Blinks while bridge is powering up and performing power-on 
self-test. While bridge is ready, LED remains on without 

blinking. 

Indicates the bridge is operating in 4.9-5.85 GHz range. LED 

blinks at a different rate in correspondence to the transfer 

rate. 

Indicates the bridge is operating in 2.4-2.5 GHz.  This 

functionality is not available in standard configuration. 

Indicates the bridge has a physical Ethernet connection and 

is linked to your network at 10 Mbps. 

Indicates the bridge has a physical Ethernet connection and 

is linked to your network at 100 Mbps. 

Pressing the reset button and holding it in for more than 4 

seconds will set the bridge network settings to factory 

defaults.  Cycle the power to enable new settings. 

 

- 14 -