Airaya Corp GRID-C3 Benutzerhandbuch

 

Airaya

 – Fast and affordable outdoor wireless bridges

 

Hardware Revision – Current hardware revision of the bridge you’re 
connected to. 

Bridge Uptime – Amount of time the bridge has been active since the 

last reboot. 
 
Operating In – Specifies the general frequency range of bridge 
operation. 
 

Unique Name – A unique identifier with up to 32 characters, which is 
commonly used as a location identifier. Control characters are not allowed 
in this field. 

 

IP Address – IP address of the bridge. The IP address for each bridge 
must be unique, so please check with your network administrator for the 

correct IP address assigned to your device. 
 
Subnet Mask – Current subnet mask of the bridge you are working with. 
The subnet mask allows networking software to determine which parts of 
the IP address specify the network address and which parts specify the 
host address. 

 
Gateway Address – Current gateway address of the bridge you are 
working with. IP packets destined for other subnets are automatically sent 
to the default gateway, which routes traffic to the correct network. 
 

MAC Address – Unique Ethernet address of bridge you are working with. 

WirelessGrid ID – Displays a unique network ID. All bridges in a 
WirelessGRID network are required to use the same WirelessGRID ID. 

Radio Channel (center frequency) – Current channel and center 
frequency of the bridge. 
 

Radio Data Rate – Current radio data rate setting. Available options for 
data rates are based on channel size. 
 
Radio Transmit Power – Current radio transmit power setting. 
 
5 GHz Radio Mode – Current mode (e.g. enabled, disabled). 

 
Transmit Power Control (TPC) – Current status of TPC (e.g. enable or 

- 20 -