Tel-Tron Technologies Corporation WECA Benutzerhandbuch
Call Stations
Wireless Series
Description
Tel-Tron wireless call stations allow for wireless activa-
tion of an emergency call from anywhere within a resident’s
apartment or common area. These tranmitters can be used
within a full wireless system, within a telephony system,
or as an added feature to a Direct Connect system.
tion of an emergency call from anywhere within a resident’s
apartment or common area. These tranmitters can be used
within a full wireless system, within a telephony system,
or as an added feature to a Direct Connect system.
These transmitters, when activated, send a signal to either
a WRMA wireless receiver on a wireless system, to a TVTA
or TVCA which acts as a wireless receiver on a telephony
based system, or a WARB wireless receiver on a Direct
Connect system.
a WRMA wireless receiver on a wireless system, to a TVTA
or TVCA which acts as a wireless receiver on a telephony
based system, or a WARB wireless receiver on a Direct
Connect system.
All wireless call stations are surface mounted to a wall
and are useful where a fixed location to call for help is
desired.
and are useful where a fixed location to call for help is
desired.
The WECA Wireless Pullcord Station is activated by
pulling the pullcord. This transmitter is useful in areas,
such as bathrooms and bedrooms, where a pullcord reach-
ing to the floor is desired.
pulling the pullcord. This transmitter is useful in areas,
such as bathrooms and bedrooms, where a pullcord reach-
ing to the floor is desired.
The WRCA Wireless Pullcord Station is identical to the
WECA except that it also has a dual-purpose push button
that can be used for resident check-in and/or to reset the
call from the station.
WECA except that it also has a dual-purpose push button
that can be used for resident check-in and/or to reset the
call from the station.
The WRTA Wireless Touchpad Station is activated by
pressing the “Push For Help” button. The WRTA also has
a dual-purpose push button that can be used for resident
check-in and/or to reset the call from the station.
pressing the “Push For Help” button. The WRTA also has
a dual-purpose push button that can be used for resident
check-in and/or to reset the call from the station.
© 2009 Tel-Tron Technologies Corporation - Doc.WECA.
WECA
Wireless Pullcord Station
Compatibility
Wireless System
WRMA
Wireless Receiver
WAPA
Wireless Network Access Point
Telephony System
TVTA
CarePartner Telephone
TVCA
PhoneMate Communicator
Direct Connect System
WARB
Wireless Receiver
WRCA
Wireless Pullcord Station
With Check-In
WRTA
Wireless Touchpad Station
With Check-In
Specifications
Color
White
Mounting
2 #6 x 1” Pan Head, Phillips
screws
or double-sided tape
Gang
1-gang surface mount
Dimensions
5” x 3 1/4” x 1 1/4”
Battery
CR2032, 3V
FCC ID: QE2-WECA
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
Conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Rules. Operation is subject to the following two
Conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Tel-Tron Technologies Corporation
226 Fentress Boulevard
Daytona Beach, FL 32114
(386) 255-1921 • Fax (386) 258-3782
www.tel-tron.com
info@tel-tron.com
info@tel-tron.com