Interactive Toy Concepts Limited 47XXX Benutzerhandbuch

Battery for SPORTSMAN 800 ATV 
 
Your SPORTSMAN 800 ATV requires a 7.2 volt rechargeable batter pack 
(included). You must charge the battery pack with a battery charger before 
you can use it to power your SPORTSMAN 800 ATV. To charge it, connect the 
charger and battery first, then connect the charger to the nearest wall socket 
giving AC 110-120V. The first charge cycle of this battery should be at least 4 
hours. Once it is charged, the battery should feel luke warm.    Then follow 
these steps to put the battery pack in the SPORTSMAN 800 ATV. 
 

 

 

 
 
Battery Charger Instructions: 
 
CHARGER MUST BE OPERATED BY ADULTS ONLY. 
 
Note:    To remove, grasp the battery pack’s and the vehicle’s connectors, 
press and hold down the latch on the vehicle’s power connector, then pull the 
power connectors apart to disconnect them. 
 
Plug charger into a standard household outlet (110/120Volt) 
Join together the plug from the battery to the receptacle plug attached to the 
charger wires. Be sure to get a firm fit by having the ridge snap into place 
with the clip. 
Allow the battery to charge for 4 hours for a complete and full charge. 
Additional charging will not improve your battery’s output,and could 
eventually damage the battery. Do not charge a battery if you notice it leaking 
or see corrosion n any party of the battery. 
 
A characteristic of Ni-Cd batteries is a loss of power quickly. A spare battery 
is therefore recommended for longer play, and happier operators. 
If the battery is hot after operation please wait until it is cool before