Geophysical Survey Systems Inc. MINIHR Benutzerhandbuch
Quick Start Guide
StructureScan Mini HR
Geophysical Survey Systems, Inc.
25
2
Press Ï Ð to select the appropriate options:
•
Orientation – Press
to toggle between Right or Left. This will flip the screen
to allow for either right or left handed operation..
•
Language – Press
to select your language preference.
•
Units – Press
to toggle between English or Metric.
•
Laser – Press
to toggle laser On or Off. If configured On, the laser will light up in
the Collect Menu only. Note: The laser will blink (whether configured On or Off)
when battery life is low (10%).
Caution: Do not stare into beam.
when battery life is low (10%).
Caution: Do not stare into beam.
•
Sound – Press
to toggle between High, Medium, Low, or Off.
•
Version(s) – Press
to display the version number of the software. Please visit
GSSI’s web site for updates to the firmware.
•
Options – Press
to configure Scan Density and Migration Type.
• Scan
Density – Press
to toggle between Normal and Low.
• Normal – The Mini HR will scan at 8 scans/cm (approximately 240 scans/ft).
• Low – The Mini HR will scan at 4 scans/cm (approximately 120 scans/ft).
• Mig
• Low – The Mini HR will scan at 4 scans/cm (approximately 120 scans/ft).
• Mig
Type – When Migrating the data, whether to use the full samples or half
samples.
•
Max – Full number of samples (slower processing, but clearer picture).
•
Half – Every other sample (faster processing, but not as clear picture).
•
Press Î to return to the previous menu.