CommScope Technologies LLC RP-A2014 Benutzerhandbuch
Chapter 3 Baseband Controller installation
3-2
913020 10.05 April 2015
D
R
A
F
T
Preparing for Baseband Controller installation
Open the shipping box. It should have the components for one complete Controller
Unit:
Unit:
•
Chassis – including four mounting screws
•
Controller Unit (CU)
•
Power Fan Unit (PFU)
The Baseband Controller is 1U high. Be sure there is enough room for the Controller
Unit in the rack.
Unit in the rack.
Installing the Controller Module into a rack
CAUTION
The controller, when mounted, must in the horizontal position. No other
orientations are allowed.
orientations are allowed.
NOTE
The chassis requires four screws to secure it into the rack.
1
Slide the chassis into the rack.
2
Line up the holes in the chassis ears to the holes in the rack.