CommScope Technologies LLC RP-A2014 Benutzerhandbuch
Chapter 4 Radio Point Installation
4-4
913020 10.05 April 2015
DR
AF
T
Mounting the Radio Point on the ceiling tile
1 Remove ceiling tile from the overhead.
2 Cut
5” diameter hole
to fit a 4-inch octagon box and drill a 1/2” diameter hole for the Ethernet
cable pass-through.
NOTE:
Use a 1-1/2 deep RACO 8125 or equivalent.
TIP
Trace the outline of the octagon box on the ceiling tile.
Use the mounting plate as a guide on the ceiling tile.