Gemalto M2M GmbH PLS8-V Benutzerhandbuch

Seite von 40
Cinterion
®
 PLS8-X/PLS8-V Hardware Interface Overview
2.1 Key Features at a Glance
17
PLS8-X_PLS8-V_HIO_v03.009
2015-08-04
Confidential / Preliminary
Page 15 of 40
UMTS features
3GPP Release 8
PS data rate – 384 kbps DL / 384 kbps UL
GSM / GPRS / EGPRS features
Data transfer
GPRS:
Multislot Class 12
Mobile Station Class B
Coding Scheme 1 – 4
EGPRS:
Multislot Class 12
EDGE E2 power class for 8 PSK
Downlink coding schemes – CS 1-4, MCS 1-9
Uplink coding schemes – CS 1-4, MCS 1-9
SRB loopback and test mode B
8-bit, 11-bit RACH
1 phase/2 phase access procedures
Link adaptation and IR
NACC, extended UL TBF
Mobile Station Class B
SMS
Point-to-point MT and MO
Cell broadcast
Text and PDU mode
Software
AT commands
Hayes, 3GPP TS 27.007 and 27.005, and proprietary Gemalto M2M com-
mands
Firmware update
Generic update from host application over USB and ASC0
GNSS Features
Protocol
NMEA
Modes
Standalone GNSS
Assisted GNSS
- Control plane - E911
- User plane - gpsOneXTRA™
General
Power saving modes
Power supply for active antenna
Interfaces
Module interface
Surface mount device with solderable connection pads (SMT application 
interface).
Land grid array (LGA) technology ensures high solder joint reliability and 
provides the possibility to use an optional module mounting socket.
For more information on how to integrate SMT modules see also 
. This 
application note comprises chapters on module mounting and application 
layout issues as well as on additional SMT application development 
equipment.
Antenna
50
. GSM/UMTS/LTE main antenna, UMTS/LTE Diversity/MIMO 
antenna, (active/passive) GNSS antenna
USB
USB 2.0 High Speed (480Mbit/s) device interface
Feature
Implementation