Huawei Technologies Co. Ltd CBTS3612-1900 Benutzerhandbuch
Installation Manual
Airbridge cBTS3612 CDMA Base Station
Airbridge cBTS3612 CDMA Base Station
Software Installation & System Commissioning
1 Overview of Software Installation
1-1
1 Overview of Software Installation
The chapter gives a brief introduction to BTS operational software and BTS terminal
O&M software, including installation of all the software.
1.1 Overview of Software Installation
Since FPGA logic is to be loaded and upgraded, the related description of FPGA will
be given, too.
cBTS3612 software include BTS operational software and terminal maintenance
software.
I. BTS operational software
BTS operational software includes BOOT software, CPU software, and FPGA logic.
Based on its varied functions, CPU software can be further divided into BCKM
software, BCIM software, BCPM software, BRDM software, and BTRM software.
II. Terminal maintenance software
Terminal maintenance software includes local maintenance console software (LMF
soft ware) and remote O&M software (OMC software). Currently, LMF software
comprises Telnet software of PC out -of-box and FTP software. While OMC software
is composed of BAM software and Client software.
1.1.1 BTA Operational Software
I. BOOT software
BOOT software serves the startup of the board. Before delivery of BTS, BOOTROM
in every board has already been installed with startup software. Generally, the
BOOT software upgrading is realized by changing the chips.
II. CPU software
The loading of CPU software includes the following two modes:
l
If there is no old-version software on the board, the board is required to load
the software through board network port under the commissioning mode.