Huawei Technologies Co. Ltd EA260-135 Benutzerhandbuch
Thank you for purchasing the CPE. This CPE
brings you a high speed wireless network
connection.
brings you a high speed wireless network
connection.
This document will help you understand your CPE so you can start using it right away.
Please read this document carefully before using your CPE.
Please read this document carefully before using your CPE.
For detailed informat ion about the funct ions and configurat ions of the CPE, refer to the
online help on the web management page that comes with the CPE.
Note:
online help on the web management page that comes with the CPE.
Note:
You must install Adobe Reader version 6.0 or higher to read the online help.
Getting to Know Your CPE
Note:
The CPE funct ion descript ions and illustrations in this document are for your
reference only. The product you have purchased may vary.
reference only. The product you have purchased may vary.
Application Scenario
The CPE can:
Provide Internet access for Wi-Fi devices and computers.
Connect to telephones for voice services.
Expand LAN coverage together with hubs and switches.
Note:
During thunderstorms and rainy weather, turn off and disconnect the CPE.
When the CPE is in use, you can alter its position or orientation to improve signal
recept ion.
recept ion.
Use a standard or authorized external antenna to avoid CPE malfunct ions.
Selecting the Installation Environment
Obstacles such as concrete and wooden walls will affect the transmission of the network
signal. It is recommended that when you install CPE you choose an open space.
signal. It is recommended that when you install CPE you choose an open space.
Keep the CPE away from equipment that generates strong magnet ic and electric fields,
for instance microwaves, refrigerators, and satellite receivers.
for instance microwaves, refrigerators, and satellite receivers.
Appearance
○
1
Power indicator
On: CPE turned on
Off: CPE turned off
○
2
WLAN indicator
On: WLAN function enabled
Blinking: Transmitting data through WLAN
Off: WLAN funct ion disabled
○
3
WPS indicator
On: WPS funct ion enabled
Blinking: WPS interconnection verification is in progress. This process should not
take longer than 2 minutes.
take longer than 2 minutes.
Off: WPS funct ion disabled
○
4
TEL indicator
Off: On-hook condit ion
Blinking: Incoming call
On: Off-hook condit ion
○
5
Mode indicator
Steady blue: The CPE is connected to an LTE network, but no data is being
transmitted.
transmitted.
Blinking blue: The CPE is connected to an LTE network and is transmitt ing data.
Steady red: The CPE failed to connect to a wireless network.
Steady purple: The SIM card is not recognized, the PIN has not been entered, or the
PIN verification failed.
PIN verification failed.
○
6
Signal indicator
On: Indicates network signal strength. Full light indicates strong signal.
Off: No network signal.
○
7
USIM card slot
Accommodate a USIM card.
○
8
Power button
Press this button to power the CPE on or off.
○
9
Power port
Connect to the CPE's power adapter.
○
10
USB port
Only for equipment maintenance.
○
11
TEL port
Connect to telephones (optional).
○
12
LAN port
Connect to computers, switches, or other network devices.
○
13
LAN indicator
On: The port is connected to a device.
Blinking: Data is being transmitted through the port.
Off: No device is connected to the port.
○
14
WPS button
After the WPS funct ion is enabled, press and hold this button for more than 0.5 seconds