Huawei Technologies Co. Ltd RRU32612G3 Benutzerhandbuch

Figure 7-26 Installing a CPRI optical cable

NOTICE

To avoid any damage to optical cables, the cables connected to the RRU must be installed
according to the installation process. For details about the installation process, see

7.3 Installing

RRU Cables

Step 3 Connect the end labeled 2A and 2B of the optical cable to the optical module on the BBU side.

Step 4 Route the cables according to the instructions in Cabling Requirements, and then use cable ties

to bind the cables.

Step 5 Label the installed cables according to the instructions in Attaching an L-Shaped Label.

----End

7.11 Installing an RRU Power Cable

This section describes the procedure for installing an RRU power cable.

Prerequisites

A tool-less female connector (pressfit type) is added to the RRU power cable on the RRU
side. For details, see

10.1 Adding a Tool-Less Female Connector (Pressfit Type) to the

RRU Power Cable on the RRU Side

RRU3261
Installation Guide

7 Installing RRU Cables

Issue Draft A (2015-07-24)

Huawei Proprietary and Confidential