Zebra Technologies Corporation AP716102 Benutzerhandbuch
22
AP 7161 Access Point Installation Guide
A torque wrench or ratchet with a 10mm adapter, or an adjustable wrench can be used to assemble the mounting
brackets. A finished assembly of the mounting bracket kit is shown below. Assembly during deployment may
differ to achieve the required angle and rotation for optimal positioning.
brackets. A finished assembly of the mounting bracket kit is shown below. Assembly during deployment may
differ to achieve the required angle and rotation for optimal positioning.
Extension Arm Kit
When mounting an AP 7161 on poles more than 3 inches in diameter, use the extension arm kit (KT-150173-01) to
provide a minimum standoff distance of twelve inches to avoid interference with the antennas.
provide a minimum standoff distance of twelve inches to avoid interference with the antennas.