Zebra Technologies Corporation AP716102 Benutzerhandbuch
AP 7161 Access Point Installation Guide
37
Regulatory Compliance
This device is approved under the Symbol Technologies, Inc. brand. Symbol Technologies, Inc. is a wholly owned
subsidiary of Motorola Solutions, Inc. (collectively
subsidiary of Motorola Solutions, Inc. (collectively
“Motorola”).
All Motorola Solutions devices are designed to be compliant with rules and regulations in locations they are sold
and will be labeled as required. Any changes or modifications to Motorola Solutions equipment, not expressly
approved by Motorola Solutions, could void the user's authority to operate the equipment.
and will be labeled as required. Any changes or modifications to Motorola Solutions equipment, not expressly
approved by Motorola Solutions, could void the user's authority to operate the equipment.
Local language translations are available at the following website:
Motorola Solutions devices are professionally installed, the Radio Frequency Output Power will not exceed the
maximum allowable limit for the country of operation.
maximum allowable limit for the country of operation.
Antennas: Use only the supplied or an approved replacement antennas. Unauthorized antennas, modifications, or
attachments could cause damage and may violate regulations.
attachments could cause damage and may violate regulations.
FCC Approval Statement
Federal Communications Commission
Office of Engineering and Technology
Laboratory Division
Interim Plans to Approve UNII Devices Operating in the 5470 - 5725 MHz Band with Radar Detection
and DFS Capabilities
and DFS Capabilities
The FCC, NTIA, FAA and industry are working to resolve interference to Terminal Doppler Weather Radar (TDWR)
systems used near airports that has occurred from some outdoor wireless systems operating in the 5470 MHz
systems used near airports that has occurred from some outdoor wireless systems operating in the 5470 MHz
–
5725 MHz band. These wireless devices are subject to Section 15.407 of our rules and when operating as a
master device they are required to implement radar detection and DFS functions. We are continuing our work to
develop long-term equipment authorization test procedures that will ensure that the devices comply with our rules
that include protecting the TDWR operations. In the interim, the Commission will now allow certification of
wireless master devices with radar detection function and with DFS capability, if they meet the following
conditions:
master device they are required to implement radar detection and DFS functions. We are continuing our work to
develop long-term equipment authorization test procedures that will ensure that the devices comply with our rules
that include protecting the TDWR operations. In the interim, the Commission will now allow certification of
wireless master devices with radar detection function and with DFS capability, if they meet the following
conditions:
1. Devices will not transmit on channels which overlap the 5600
– 5650 MHz band.1
2. Devices intended for outdoor use will be further restricted, as follows:
•
Devices must be professionally installed when operating in the 5470
– 5725 MHz band.2
•
Grantees must provide owners, operators and all such installers with specific instructions in their
user’s
manual on requirements to avoid interference to TDWRs and information that meets the following
instructions:
instructions:
• Any installation of either a master or a client device within 35 km of a TDWR location shall be separated
by at least 30 MHz (center-to-center) from the TDWR operating frequency 3, 4, and 5.