DAEWOO Lucoms Co. Ltd CMC531X Benutzerhandbuch

Increase the value of any selected function.

While the OSD screen is off, you can adjust the screen
brightness according to each situation.

Decrease the value of any selected  function.

Turns the OSD window on and off.

Move curosr to the previous function on the OSD
window.

Move curosr to the next function on the OSD window.

1. Turn off the computer and monitor.

2. Connect the 15 pin D-sub connector to the output port of the

video card in your computer.

3. Tighten the screws of the connector.

4. Plug the power cord into the AC receptacle located on the back

of the monitor. 

5. Plug the other end of the power cord into the AC outlet.

If your power cord is PC-to-Monitor type, plug the other end
of the power cord into the AC receptacle in the computer.

Signal Cable

Power Cord