Ruby Tech OW1000A Benutzerhandbuch

13 

These are the settings of the LAN (Local Area Network) interface for the 

Access Point. The Access Point's local network (LAN) settings are 

configured based on the IP Address and Subnet Mask assigned in this 
section. The IP address is also used to access this Web-based 
management interface. This option is available in the “/NETWORK/ 

NETWORK /” page as shown in Figure 2-6.

Choose "DHCP (Dynamic)" if your router supports DHCP and you want 

the router to assign an IP address to the AP. In this case, you do not need 
to fill in the following fields. Choose "Static IP (Manual)" if your router 

does not support DHCP or if for any other reason you need to assign a 

fixed address to the AP. In this case, you must also configure the 
following fields.