Continental Automotive GmbH DHSNFC Benutzerhandbuch
AuD5 NFC : product overview – usage for homologation
Date
Department
Designed by
Released by
Designation
IMS ID
IMS ID
161711
SAP ID
10 348616
Document version as of
April 27, 2017
Pages
20 of 33
Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited.
Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved.
Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved.
4.3
NFC Communication
4.3.1
NFC type
ID: 167097
State: Released
The interface to smartphone / smartcard is defined according to ISO 14443A.
Once a PICC has been detected, the DHS shall enter the NFC RF discovery mode.
The DHS shall search for all allowed devices, and communicate with PICC type : NFC A Type 4.
4.3.2
Actuator test
ID: 191483
State: Released
When DHS receive the frame NFC_01 with signal Stellgliedtest_NFC set, the DHS shall perform
the actuator test requirement as described below :
1. It shall turn on the antenna for at least p_t_tgs_actuator_test s and look for an external
device with RF discovery polling rate as short as possible
2. If it finds an appropriate counterpart (NFC-A Type 4), it shall activate and send the SELECT
command.
3. It shall feedback the result by changing the parameter "authenticated NFC-counterpart"
The DHS Application shall execute the acutator test (when requested) at any time regardless of
the Misuse or K15 State and ESM.
It is required that the field is turned on during the complete duration of the actuator test.
the actuator test requirement as described below :
1. It shall turn on the antenna for at least p_t_tgs_actuator_test s and look for an external
device with RF discovery polling rate as short as possible
2. If it finds an appropriate counterpart (NFC-A Type 4), it shall activate and send the SELECT
command.
3. It shall feedback the result by changing the parameter "authenticated NFC-counterpart"
The DHS Application shall execute the acutator test (when requested) at any time regardless of
the Misuse or K15 State and ESM.
It is required that the field is turned on during the complete duration of the actuator test.
REQA is replaced by WUPA to ensure several communication possible whereas field is kept on.
The DHS shall stop the actuator test if: