Socket Mobile CF6V2 Benutzerhandbuch

 

The SOMO 655 RFID Reader Card has four reading modes, based on different 
combinations of inventory mode and loop mode. The chart below shows the 
results of enabling or disabling the modes. 

 

One tag 

Disabled 

Disabled 

Selects the first tag in RF field 

One tag 
continuously 

Enabled 

Disabled 

Selects the first tag continuously (the same tag ID 
will be returned as long as the tag remains in the 
RF field. 

All tags 
present 

Disabled Enabled 

Inventory mode: returns the tag IDs of all tags in 
the RF field and then reports when there are no 
more tags. 

All tags 
continuously 

Enabled 

Enabled 

Returns the tag IDs of all tags in the RF field. It 
does not repeat a tag ID unless the tag goes out 
and then re-enters the RF field. 

 
Note: Not all tag types are readable in Inventory Mode. 
 
1.  In the main screen of RFID Demo, tap RFID at the bottom of the screen. In 

the pop-up menu, select adjust the Inventory Mode and/or Loop Mode 
settings as desired. 

 

 

 

2.  After selecting the desired settings, tap Select Tags. The SOMO 655 RFID 

Reader Card will search for tags in range, according to your settings. 

CHAPTER 5: RFID DEMO 

29