ASUSTeK Computer Inc Z00VD Benutzerhandbuch
User Guide
E11068
Revised Edition V3 / October 2015
Model: ASUS_Z00VD
Before you start, ensure that you have read all the safety
information and operating instructions in this User Guide
to prevent injury or damage to your device.
information and operating instructions in this User Guide
to prevent injury or damage to your device.
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
information, please visit www.asus.com.
Front features
Front camera
Touch screen
display
Receiver
Touch keys
Sensor
Side features
NOTE: Pry open the rear cover from the groove.
Micro USB port
Audio jack
Groove
Volume key
Microphone
Power key
Rear features
NOTES:
•
Remove the rear cover to display the dual micro
SIM and microSD card slots.
•
The micro SIM card slots support WCDMA and
GSM/EDGE network bands.
•
The microSD card slot supports microSD and
microSDHC card formats.
Rear camera
Rear cover
Speaker
Camera flash
Charging your ASUS Phone
To charge your ASUS Phone:
1. Connect the USB connector into the power adapter’s
USB port.
2. Connect the other end of the micro USB cable to
your ASUS Phone.
3. Plug the power adapter into a wall socket.
3
1
2
NOTES:
•
Use only the power adapter that came with your
device. Using a different power adapter may
damage your device.
damage your device.
•
Using the bundled power adapter and ASUS Phone
signal cable to connect your ASUS Phone to a
power outlet is the best way to charge your ASUS
Phone.
power outlet is the best way to charge your ASUS
Phone.
•
Use the ASUS 5W power adapter and ASUS USB
cable to get the best fast-charge experience when
your ASUS Phone is in sleep mode.
your ASUS Phone is in sleep mode.
•
The input voltage range between the wall outlet and
this adapter is AC 100V - 240V. The output voltage
of the micro USB cable is +5.2V
1A, 5W.
IMPORTANT!
•
When using your ASUS Phone while it is plugged to
a power outlet, the grounded power outlet must be
near to the unit and easily accessible.
near to the unit and easily accessible.
•
When charging your ASUS Phone through your
computer, ensure that you plug the micro USB
cable to your computer’s USB 2.0 / USB 3.0 port.
•
Avoid charging your ASUS Phone in an
environment with ambient temperature of above
35
35
o
C (95
o
F).
3.
Remove the battery.
1.
Locate the groove on
the lower-right corner
of your ASUS Phone.
the lower-right corner
of your ASUS Phone.
Installing a micro SIM card
To install a micro SIM card:
2.
Pry the cover loose
and then pull the
rear cover off.
and then pull the
rear cover off.
4. Insert the micro SIM card into one of the micro SIM
card slots.
Installing a microSD card
To install a microSD card:
1.
Locate the groove on
the lower-right corner
of your ASUS Phone.
the lower-right corner
of your ASUS Phone.
IMPORTANT: Use only a micro SIM card on your ASUS
Phone. A trimmed SIM card may not properly it into and
may not be detected by your ASUS Phone.
may not be detected by your ASUS Phone.
NOTE: Both micro SIM card slots support 3G/2G
WCDMA network bands. But only one micro SIM card
WCDMA network bands. But only one micro SIM card
can connect to 3G WCDMA service at a time.
Micro SIM card 1
Micro SIM card 2
CAUTION: Do not use sharp tools or solvent on your
device to avoid scratches on it.
device to avoid scratches on it.
4. Insert the microSDcard into the microSD card slot.
3.
Remove the battery.
2.
Pry the cover loose
and then pull the
rear cover off.
and then pull the
rear cover off.
Safety information
ASUS Phone care
•
Use your ASUS Phone in an environment with
ambient temperatures between -10 °C (14 °F) and
35 °C (95 °F).
The battery
Your ASUS Phone is equipped with a high performance
non-detachable Li-Ion battery. Observe the maintenance
guidelines for a longer battery life.
non-detachable Li-Ion battery. Observe the maintenance
guidelines for a longer battery life.
•
Do not remove the non-detachable Li-on battery as
this will void the warranty.
this will void the warranty.
•
Avoid charging in extremely high or low temperature.
The battery performs optimally in an ambient
temperature of +5 °C to +35 °C.
•
Use only ASUS battery. Using a different battery
may cause physical harm/injury and may damage
your device.
may cause physical harm/injury and may damage
your device.
•
Do not remove and soak the battery in water or any
other liquid.
other liquid.
•
Never try to open the battery as it contains
substances that might be harmful if swallowed or
allowed to come into contact with unprotected skin.
substances that might be harmful if swallowed or
allowed to come into contact with unprotected skin.
•
Do not remove and short-circuit the battery, as it may
overheat and cause a ire. Keep it away from jewelry
or metal objects.
or metal objects.
•
Do not remove and dispose of the battery in ire. It
could explode and release harmful substances into
the environment.
could explode and release harmful substances into
the environment.
•
Do not remove and dispose of the battery with your
regular household waste. Take it to a hazardous
material collection point.
material collection point.
•
Do not touch the battery terminals.
NOTES:
•
Risk of explosion if battery is replaced by an
incorrect type.
•
Dispose of used battery according to the
instructions.
The charger
•
Use only the charger supplied with your ASUS
Phone.
Phone.
•
Never pull the charger cord to disconnect it from the
power socket. Pull the charger itself.
power socket. Pull the charger itself.
Caution
Your ASUS Phone is a high quality piece of equipment.
Before operating, read all instructions and cautionary
Before operating, read all instructions and cautionary
markings on the (1) AC Adapter.
•
•
Do not use the ASUS Phone in an extreme
environment where high temperature or high
environment where high temperature or high
humidity exists. The ASUS Phone performs optimally
in an ambient temperature between -10 °C (14 °F)
and 35 °C (95 °F).
•
Do not disassemble the ASUS Phone or its
accessories. If service or repair is required, return
accessories. If service or repair is required, return
the unit to an authorized service center. If the unit
is disassembled, a risk of electric shock or ire may
result.
result.
•
Do not short-circuit the battery terminals with metal
items.
items.
Operator access with a tool
If a TOOL is necessary to gain access to an OPERATOR
ACCESS AREA, either all other compartments within
that area containing a hazard shall be inaccessible
to the OPERATOR by the use of the same TOOL, or
such compartments shall be marked to discourage
such compartments shall be marked to discourage
OPERATOR access.