CyberTAN Technology Inc. UIW8001 Benutzerhandbuch

Clause 2.5 and rated as indicated on the label 

on your product. It must be tested and 

approved to national, or local standards.

• For US and Canada: This product is intended to 

be supplied by a UL listed Direct Plug-in Power 

Unit marked "Class 2" and rated as indicated 

on the label on your product.

Only use the power supply unit that is supplied 

with this product. The use of other types of 

supplies is prohibited. If you are not sure of the 

type of power supply needed, consult the 

product's user documentation or contact your 

local product dealer.
Accessibility
The plug on the power supply cord or power 

supply unit serves as disconnect device. Be sure 

that the mains supply socket outlet you use is 

easily accessible and located as close to the 

product as possible.

The power connections to the product and the 

mains supply socket outlet socket must be 

accessible at all times, so that you always can 

disconnect the product quickly and safely from 

the mains supply.
Overloading
Do not overload mains supply socket outlets and 

extension power cords as this increases the risk of 

fire or electric shock.
Handling batteries
This product (or its remote control) may contain 

disposable batteries.

• Insert batteries correctly. There may be a risk of 

explosion if the batteries are incorrectly 

inserted.

• Do not attempt to recharge ‘disposable’ or 

‘non-reusable’ batteries.

• Please follow instructions provided for charging 

‘rechargeable’ batteries.

• Replace batteries with the same or equivalent 

type.

• Do not expose batteries to excessive heat (such 

as sunlight or fire) and to temperatures above 

100 °C (212 °F).

Coin/button cell batteries

Cable Distribution
For this apparatus, the cable shield/screen shall be 

grounded (earthed) as close as practical to the 

point of entry of the cable into the building.

For products sold in the US and Canada, this 

reminder is provided to call the system installer's 

attention to ANSI/NFPA 70, the National 

Electrical Code (NEC), in particular Section 

820.93, Grounding of Outer Conductive Shield 

of a Coaxial Cable (or Canadian Electrical Code 

Part 1).
Limiting the human body exposure to 
electromagnetic fields
This product should be installed and operated at 

least 20 cm (8 inches) or more away from a 

person’s body.
Servicing
To reduce the risk of electric shock, do not 

disassemble this product. None of its internal 

parts are user-replaceable; therefore, there is no 

reason to access the interior. Opening or 

removing covers may expose you to dangerous 

voltages. Incorrect reassembly could cause 

electric shock if the appliance is subsequently 

used.

If service or repair work is required, take it to a 

qualified service dealer.
Damage requiring service
Unplug this product from the mains supply socket 

outlet and refer servicing to qualified service 

personnel under the following conditions:

• When the power supply, power cord or its plug 

are damaged.

• When the attached cords are damaged or 

frayed.

• If liquid has been spilled into the product.

!

There is danger of explosion if the 

battery is mishandled or incorrectly 

replaced. Replace only with the same or 

equivalent type of battery. Do not 

disassemble it or attempt to recharge it 

outside the system. Do not crush, 

puncture, dispose of in fire, short the 

external contacts, or expose to water or 

other liquids.

!

This product or remote control supplied 

with this product may contains a coin/

button cell battery. If the coin/button 

battery is swallowed, it can cause severe 

internal burns in just 2 hours and lead to 

death.

Keep new and used batteries away from 

children. If the battery compartment 

does not close securely, stop using the 

product and keep it away from children. If 

you think batteries might have been 

swallowed or placed inside any part of 

the body, seek immediate medical 

attention.