CyberTAN Technology Inc. WA310A Benutzerhandbuch

 

 

 

“INIT” mean “Initiation”. While pressing the button, the adapter will 
reboot and reset current settings to factory default settings. The left 
indicator “DIAG” on adapter will be off and then begin blinking. 
Then this initiation action will be completed when the indicator 
“ DIAG” is always green instead of blinking. 

Crossover: the RJ-45 port Tx and Rx lines are 
reversed. Use this setting when you use the supplied 
straight cable connected to PC. It is also the factory 
default setting.   

Straight:  the RJ-45 port Tx and Rx lines are normal. 
Use this setting when you have the supplied straight 
cable connected to Hub/switch   

Only use the power adapter supplied with the Ethernet adapter 

 
LAN Connection   

Use standard Ethernet cable (RJ-45 connector) to connect your 

PC, hub/switch or broadband router/modem to this port.